DOT Approved Single-button flip face modular design Flip up interchangeable face shield Flow-Through Ventilation System Anti-Fog System Optically-correct one-piece shield design Padded chin-strap with nylon strap-retention band Lightweight fiberglass shell Dual-density lightweight liner removes for easy cleaning Aerodynamic flush-mounted face shields Helmet bag included Imported Stylish Convenience best describes this new addition to the Rodia line of products. The Rodia RF-4 Modular incorporates the benefits of a full-face helmet with the advantages of an open-face helmet. Flip up the shield or the touch of a button opens the entire front. Aerodynamic fiberglass shell with ABS/Polycarbonate Alloy chin bar. Large eyeport opening increases your visibility. Single-button release allows chin bar/face shield to be opened with either hand for easier communication and also makes wearing glasses more comfortable. Three-position forehead intake and the Venturi Exhaust Super Vent keep you cooler in the heat of the day. The adjustable chin vent directs air upwards across the inside of the shield plus the removable pre-formed breath guard help prevent fogging. The new mesh-trimmed liner channels moisture away from the skin, and the cheek pads and upper liner are easily removed to allow for cleaning. The padded ear panels and wrap-around neck roll reduce wind noise. Or, remove your ear panels to install communication system speakers.

Price: $149.00

Crafted from soft, durable top-grain cowhide. Fleece Lined with Rear Velcro Closure. Perforated leather around the nose. Made in the USA This fleece-lined leather face mask will make the coldest rides more comfortable. Designed to conform to the contours of your face, the leather face mask wraps warmly around your neck, chin and nose and fastens securely behind your head with Velcro. The face mask is perforated around the nose.

Price: $30.00

Soft and durable top-grain cowhide. Fleece lined with adjustable Velcro closure Fits head circumference of 16' to 23' Bandanna measures 24' across and 13.5' from tip to center. Made in USA Our leather bandannas are the perfect companion for the road. Can be worn under your chin or over your nose as a mask. When worn as a mask, the polar fleece lined, top-grain cowhide will ensure your face stays warm. All bandannas come with an adjustable Velcro closure. Made in USA.

Price: $25.00

Crafted from top-grain cowhide leather. Soft padded nylon lining. D-ring buckled chin strap. Can be worn as helmet liner or by itself. Made in USA Made of soft, durable top-grain leather, our leather aviator hats can be worn as a helmet liner or by itself. This hat has a padded nylon liner. A d-ring buckled chin strap keeps the hat securely on your head. Made in USA.

Price: $25.00

Closeout -- 10% off while supplies last* DOT approved Super light weight - Approximately 30 oz Smallest construction EPS Liner Thickness - 1 inch Helmet Bag and Owners Manual included Made from different size shells Quality Plush Interior Removable visor Face Shield Compatible Imported This is a DOT Vented Shorty Series DOT Motorcycle Beanie Helmet which is the lightest and smallest in the market. Three different shell sizes are used to make different sizes. There are no other helmets on the market that vent like this one. These are tested and keep you 20 Degrees cooler when opened. This Motorcycle Helmet weighs approximately 30 oz and measures 8.5 inches from ear to ear and 10.5 inches from front to back. This has a new EPS liner which is only 1 inch thick compared to 1.5 to 2 inches you will find in other similar helmets

Price: $65.00

DOT approved Super light weight - Approximately 30 oz Smallest construction EPS Liner Thickness - 1 inch Helmet Bag and Owners Manual included Made from different size shells, not stuffing more padding for smaller size Quality Plush Interior Removable visor Face Shield Compatible Imported This is a DOT Vented Shorty Series DOT Motorcycle Beanie Helmet which is the lightest and smallest in the market. Three different shell sizes are used to make different sizes. There are no other helmets on the market that vent like this one. These are tested and keep you 20 Degrees cooler when opened. This Motorcycle Helmet weighs approximately 30 oz and measures 8.5 inches from ear to ear and 10.5 inches from front to back. This has a new EPS liner which is only 1 inch thick compared to 1.5 to 2 inches you will find in other similar helmets

Price: $65.00

Measures 16' X 16' Stretches to 24' X 24' square Rubber-tipped hooks This elastic net can attach a helmet or other item to your passenger seat or luggage rack. The bungee material stretches to accommodate up to 24' X 24' square or 36' X 16' oblong shapes. Six hooks hold the helmet or package securely, while the rubber tips protect the finish on your bike.

Price: $12.00

DOT Approved Motorcycle Helmets RMT10 Series Meets or exceeds DOT Standards Injected thermoplastic resin or composite fiber shell 3 Snap bubble peak UV lacquer finish Wet sanded, then clear coated 3 times. Nylon Webbing Fully Lined Sewn Interior Seams sewn to outside. Imported DOT 3/4 helmet Motorcycle Helmets. Each Helmet comes with it's own black pull string bag for storage, which doubles as a cleaning cloth. When not in use just put it back in the custom fitted pull string bag. The shell design has been wind tunnel tested and worn by several racers for comfort and fit.

Price: $61.00